What's wrong with the floor scrubber not producing water?

The application of floor scrubbers has become very common, and they can be used for floor cleaning in many places such as shopping malls, supermarkets, workshops, restaurants, stations, hospitals, schools, etc. They can achieve efficient and high-quality cleaning effects, greatly saving cleaning expenses, and improving environmental quality. However, during the process of using a floor scrubber, some problems may arise over time. Today, we will introduce to you "What's wrong with a floor scrubber that doesn't produce water".

We can analyze and solve the problem of no water output from a general floor washer through the following four points.

1. If this floor washing machine does not produce water, it may be due to insufficient water. If you want to operate normally, you need to fill up the water tank before each operation, so you need to check the water tank and inject clean water in a timely manner.

2. In addition, if the drain valve is not opened during operation, it will result in no way to discharge water even if it is full. Just check the drain switch, push it, and you can flip it over, perhaps some are controlled by buttons.

3. If it is not for the first two reasons, it is also necessary to check the filter screen, as it may become blocked after prolonged use. Perhaps there are some impurities in the clean water, so it cannot be discharged.

4. If the outlet pipe is blocked, just clean it up. You can directly blow through the air pump to remove impurities from the water pipe. Another reason is that there is a ball valve inside the clean water tank. If it is damaged, it is an electromagnetic valve that can control the water switch. If there is a problem, it can also cause no water to flow.

If you encounter similar situations in the future, you can handle them as described above.