Hotel hand washing machine

The hand push floor scrubber is an efficient and convenient cleaning equipment widely used for floor cleaning in various public places such as shopping malls, supermarkets, hospitals, airports, etc. It can quickly remove ground stains through mechanical force combined with appropriate cleaning agents, creating a clean and hygienic environment for people. This article will provide a detailed introduction to the use of a manual floor washer.

The hand pushed floor scrubber mainly consists of a brush tray, a suction scraper, a clean water tank, and a sewage tank. Among them, the brush disc is the main component of the floor scrubber, which rubs the ground clean by rotating the brush. Water suction scoops are used to absorb excess moisture from the ground and keep it dry. Clean water tanks and sewage tanks are used to store water and sewage used for cleaning the ground.

The following steps are required to use a manual floor washer:

Turn on the switch of the floor washer, check if all components are connected properly, and if the water tank is filled with water.

Step on the brush plate lifting pedal and lower the brush plate. This step requires attention to the position and height of the brush disc, ensuring that the brush can make full contact with the ground without excessive wear and tear on the brush.

Lower the suction rake to the ground, and the suction rake head should be in close contact with the ground to absorb excess moisture.

Adjust the water output based on the cleanliness of the ground. If the ground is dirty, the water output can be increased to make the cleaning more thorough. If the ground is relatively clean, the water output can be appropriately reduced to avoid wasting water resources.

Press the start button of the brush disc and the water suction button to start pushing the floor scrubber to clean at an appropriate speed. In this step, it is necessary to pay attention to the driving direction and speed of the manual floor scrubber, to ensure that it can run smoothly and avoid colliding with other objects.

The following points need to be noted when using a manual floor scrubber:

Operators need to receive relevant training to understand the operating methods and safety precautions of the floor washing machine.

Before use, it is necessary to check whether all components of the equipment are in good condition, and if there are any problems, they need to be repaired or replaced in a timely manner.

During use, it is necessary to always pay attention to the operating status of the equipment, and in case of any abnormal situation, it is necessary to stop the machine for inspection in a timely manner.

After use, it is necessary to clean the equipment in a timely manner to maintain its hygiene and good condition.

Attention should be paid to safety during use to avoid accidents.

In short, a hand scrubber is an efficient and convenient cleaning device that can create a clean and hygienic environment for people. During use, it is necessary to follow the correct method of operation, pay attention to safety and hygiene issues, and ensure the normal operation and effectiveness of the equipment.